Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Lexicon DD-8
| Highlights | |
| 8-channel Multi-room Audio Amplifier | |
| Multi-patented DriveCore Amplifier Technology | |
| 8 channels each with 125W into 8-ohms, All Channels Driven | |
| High-efficiency, Quiet Convection-cooled Design | |
| Local/Bus RCA Input Selection and Independent Channel Output Level Controls | |
| 12V Trigger Input/Outputand Signal-sensing Channel Inputs | |
| Short-circuitand Thermal Protection Circuitry | |
| Specification | |
| Frequency Response | 20Hz-20kHz +0/-1.5dB |
| Input Impedance | 100K ohms typical |
| Input Sensitivity | 1.12 volts for 125W out into 8 ohms |
| Height | 2.1" (5.4cm) w/ feet / 1.7" (4.5cm) w/out feet (1 rack space) |
| Width | 17.3" (43.8cm) |
| Depth | 14.9" (37.8cm) |
| Weight | 9.2 lb (4.2kg) |
| Communication and Control | 12V DC Trigger In/Out (3.5mm and Phoenix) |
| Inputs | Bus and Local L/R RCA jacks |
| Rated Output Power Into 8 Ohms | 125W RMS per Channel from 20Hz-20kHz, All Channels Driven |
| Signal-to-Noise Ratio | < -105dB Below Rated Full Power A-weighted |
| Total Harmonic Distortion (THD) | Less than 0.05% at Full Rated Power 20Hz-20kHz |
| Gain | 29dB |
| Power Requirements | 100-240VAC 50/60Hz 190W |
| Speaker Connections | 4-pin Phoenix-type Connectors |
| Included Accessories | Rack Ears and Mounting Hardware |



