Audio System hat seiner modernsten DSP-Endstufengeneration eine kleine Überarbeitung gegönnt, die in der Praxis einen großen Unterschied macht.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Crown I-Tech 4x3500 HD
| Specification | |
| Type | Four-channel, 4000W @ 4Ω Power Amplifier |
| Channels | 4 inputs, 4 outputs (Analog, AES 3, VDrive, CobraNet) |
| 2 Ohm | 3500W |
| 2.7 Ohm | 3800W |
| 4 Ohm | 4000W |
| 8 Ohm | 2100W |
| 4 Ohm bridged | 6000W |
| 8 Ohm bridged | 7000W |
| Sensitivity | Adjustable in 0.1dB increments from 1.28Vrms to 8Vrms |
| Damping Factor | > 5000 |
| Signal to Noise Ratio | ≥ 108dB |
| THD (full rated power, 20 Hz - 20 kHz) | 0.35% |
| Frequency Response | ± 0.25dB |
| Intermodulation Distortion (from 0 dB down to -40 dB) | 0.06% |
| Crosstalk | > 80dB |
| Common Mode Rejection | > 80dB typical |
| Dimensions | 3.3" x 19" x 16.95" (8.9 cm x 48.3 cm x 43.1 cm) |
| Net Weight | 29 lbs (13.2 kgs) |
| Power Connector | 32A powerCON (on amp) - L6-30 plug (into wall) |



