„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Crown CT 475
| Specification | |
| Type | Four-channel, @ 4Ω 75W Power Amplifier |
| Channels | 4 |
| Sensitivity | 1.4 V |
| Rated Power Output (all channels driven) | 75W per CH @ 4 ohms, 75W per CH @ 8 ohms |
| Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | 110 dB |
| THD (full rated power, 20 Hz - 20 kHz) | < 0.05% |
| Intermodulation Distortion (from 0 dB down to -30 dB) | < 0.05% |
| Frequency Response (at 1W, 4/8 ohms) | +/- 0.5 dB |
| Crosstalk (below rated power) 20 Hz to 1 kHz | > 70 dB |
| Common Mode Rejection (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB |
| Voltage Gain | 25 dB |
| DC Offset | +/- 20mV |
| Idle Power Consumption (Standard Mode) | 15.0W |
| Dimensions | 1.75" x 19" x 15.19" |
| Weight | 10lbs/4.54kg |
| IEC Power Connector | 15A |



