Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Car Hifi Endstufe Mono
Ausstattungsliste: Rockford P500X1BD
| Specifications | |
| Number of Channels | 1 |
| Rated Power (RMS Continuous Power) | 150 Watts x 1 @ 4-Ohm |
| 300 Watts x 1 @ 2-Ohm | |
| 500 Watts x 1 @ 1-Ohm | |
| Total Power (Sum of Rated Power) | 500 Watts RMS |
| Dynamic Power (PVC/PowerCube® Measurement) | 269 Watts x 1 @ 4-Ohms |
| 476 Watts x 1 @ 2-Ohms | |
| 758 Watts x 1 @ 1-Ohm | |
| Bridgeable | No |
| Efficiency (average) | 86% @ 4-Ohm |
| Crossover Controls | Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth |
| Infrasonic Filter (IF): 28Hz @ 12dB/Octave | |
| Tone Controls | Punch EQ2 Bass: 0dB to +18dB @ 45Hz |
| Signal Input | Hi/Low level: 1 RCA pair |
| Signal Output | Low level: 1 RCA pair |
| Power Input Connector | Captive C-Clamp |
| Power Wire Gauge | 4 AWG |
| Speaker Output Connector | Captive C-Clamp |
| Speaker Wire Gauge | 8 AWG to 18 AWG |
| Heat Sink Type | Cast aluminum |
| Cooling | Convection |
| Remote Controls | Optional Punch Level Control (PLC2) Ready |
| Visual Indicators | Power/Protect/Thermal LED |
| Input Clip LED | |
| Output Clip LED | |
| Circuit Topology Class | Class-BD |
| Frequency Response | 20Hz to 250Hz +/- 1.0dB |
| Shipping Weight | TBA Lbs. (TBA Kg.) |
| Dimensions (HxWxL) | 2.38 x 7.76 x 11.03 (in) 6.05 x 19.71 x 28.02 (cm) |
|
323-2541
Masori |



