Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Parasound NewClassic 2250 v.2
| Specification | |
| All Channels Driven | 275 watts x 2, 8Ω |
| 400 watts x 2, 4Ω | |
| 400 watts x 2, 2Ω (Load switch set to 2-3Ω) | |
| Bridged Mono | 750 watts x 1, 8Ω |
| 750 watts x 1, 4Ω (Load switch set to 2-3Ω) | |
| Current Capacity | 45 amps peak per channel |
| Frequency Response | 20 Hz - 50 kHz, +0/-3 dB, 1 watt |
| Dynamic Headroom | - 1.6 dB |
| Total Harmonic Distortion | 0.20% at full rated output |
| 0.015% at average listening levels | |
| IM Distortion | - 0.05 % |
| Transient IM Distortion | Not measurable |
| S/N Ratio | 114 dB at rated output, IHF A-weighted |
| 106 dB at rated output, unweighted | |
| 93 dB at 2.828 V output, IHF A-weighted | |
| 84 dB at 2.828 V output, unweighted | |
| Input Impedance | - 33 k Ω |
| Input Sensitivity | 1 V in for 28.28 V out, THX standard |
| Inter-Channel Crosstalk | 85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz |
| Damping Factor | Over 150 at 20Hz |
| 12V Trigger Turn On | DC 9 – 12V, 15 mA |
| Audio Turn On | Quieter: 1 mV |
| Louder: 6 mV | |
| AC Power Requirement | 110 - 120 V / 220 -240 V, 50 - 60 Hz |
| 0.5 watts standby | |
| 35 watts Idle (no audio) | |
| 1000 watts full output | |
| Dimensions | 17.25" Wide |
| 18.5" Deep, with cables connected | |
| 6" High with feet, 5.25" panel only (3U) (437 x 470 x 153mm, 133mm panel only) | |
| Net Weight | 43 lbs (19.5 kg) |



