700_24860_2
Topthema: Zubehör-Kabel · Symphonic Line Harmonie + Harmonie HD + Das Schnelle
Schnelligkeit und Harmonie
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICE8LPT
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) treated paper w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) treated cloth dome, horn loaded |
| Crossover Frequency | 2,5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30WW at 70V; 7.5W/15W/30W at 100V |
| Frequency Response | 80 Hz to 20 kHz (±3 dB) |
| Frequency Range | 65 Hz to 20 kHz (-10 dB) |
| Power Handling | 60 Watts program (8 Ohms) |
| Sensitivity | 89 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, side-entry cable clamp |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 5.2 in (130 mm) minimum mounting depth, 11.2 in (285 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.13 in (308 mm) not including toggles |
| Depth | 5.30 in (135 mm) |
| Weight | 10.8 lb (4.9 kg) |
