688_24832_2
Topthema: Over-Ear-Kopfhörer Loewe leo
Gut gebrüllt, Loewe?
Die oberfränkische Traditionsfirma Loewe hat in ihrer über 100-jährigen Historie viele legendäre HiFi- und TV-Geräte herausgebracht. Doch ein Kopfhörer war nie dabei. Bis jetzt.
>> Mehr erfahren>> Alle anzeigen
691_24536_2
Topthema: Aktiv-Standlautsprecher · Loutd musegg
Kaufen oder leihen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICE6T
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 6.5 inch (165 mm) treated paper w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) treated cloth dome, horn loaded |
| Crossover Frequency | 2,5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30W at 70V; 7.5W/15W/30W at 100V |
| Frequency Response | 75 Hz to 20 kHz (±3 dB) |
| Frequency Range | 60 Hz to 20 kHz (-10 dB) |
| Power Handling | 60 Watts program (8 Ohms) |
| Sensitivity | 89 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, 1/2" or 3/4" conduit knockout top and side, (1) cable clamp included |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps; 2.4 in (61 mm) maximum surface thickness; 8.1 in (206 mm) minimum mounting depth; 9.7 in (245 mm) diameter recommended cutout; Tile bridge included; |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 10.57 in (269 mm) not including toggles |
| Depth | 8.31 in (211 mm) |
| Weight | 10.0 lb (4.5 kg) |
