698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
687_18627_1
Anzeige
Topthema: Deep Purple und Revox vereinbaren eine Partnerschaft…
und präsentieren die einzigartige - Deep Purple – LIMITED EDITION
Die Rockgruppe Deep Purple und das Audiounternehmen Revox präsentieren gemeinsam eine exklusive, weltweit limitierte und signierte Sonderedition...
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICE6LPT
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 6.5 inch (165 mm) treated paper w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) treated cloth dome, horn loaded |
| Crossover Frequency | 2,5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30W at 70V; 7.5W/15W/30W at 100V |
| Frequency Response | 85 Hz to 20 kHz (±3 dB) |
| Frequency Range | 70 Hz to 20 kHz (-10 dB) |
| Power Handling | 60 Watts program (8 Ohms) |
| Sensitivity | 89 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, side-entry cable clamp |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 5.2 in (130 mm) minimum mounting depth, 9.7 in (245 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 10.64 in (270 mm) not including toggles |
| Depth | 5.30 in (135 mm) |
| Weight | 9.2 lb (4.2 kg) |
