698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
688_24832_2
Topthema: Over-Ear-Kopfhörer Loewe leo
Gut gebrüllt, Loewe?
Die oberfränkische Traditionsfirma Loewe hat in ihrer über 100-jährigen Historie viele legendäre HiFi- und TV-Geräte herausgebracht. Doch ein Kopfhörer war nie dabei. Bis jetzt.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_IC8T
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) polypropylene w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) titanium dome, horn loaded |
| Crossover Frequency | 2.5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30W/60W at 70V; 7.5W/15W/30W/60W at 100V |
| Frequency Response | 50 Hz to 20 kHz (±3 dB) |
| Frequency Range | 40 Hz to 20 kHz (-10 dB) |
| Power Handling | 150 Watts program (8 Ohms) |
| Sensitivity | 90.5 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5 mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, 1/2” or 3/4” conduit knockout top and side, (1) cable clamp included |
| Baffle | Glass fiber reinforced ABS plastic, UL 94V-0 flame rated |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 8.9 in (226 mm) minimum mounting depth, 11.2 in (285 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.07 in (307 mm) not including toggles |
| Depth | 9.10 in (231 mm) |
| Weight | 12.5 lb (5.7 kg) |
