Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: D/A-Wandler
Ausstattungsliste: Denafrips VENUS
| Specification | |
| R-2R DAC | Proprietary R2R + DSD Architecture |
| True balanced 26BIT R2R + 6BIT DSD (32 steps FIR Filters) | |
| Native DSD decoding with 0.005% precision resistors | |
| Highlight | Encapsulated Ultra Low Noise Power Supply |
| Amanero USB Interface | |
| Ultra Low Jitter Digital Receiver AK4118 | |
| Adaptive FIFO Buffer Reclocking | |
| DSD | 2.8224MHz(DSD1X) On All Input |
| 5.6448MHz(DSD2X), 11.288MHz(DSD4X) On USB & I2S Input Only | |
| PCM | 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input |
| 24bits / 352.8, 384kHz On USB & I2S Input Only | |
| Digital Input | Coax 1 via RCA |
| Coax 2 via BNC 75 Ω | |
| TOSLink x 1 | |
| AES EBU x 2 | |
| USB | |
| I²S via HDMI LVDS / RJ45 LVCMOS | |
| Analog Output | RCA at 2.2Vrms, 625 Ω |
| XLR at 4.4Vrms, 1250 Ω | |
| Sampling Mode | Non-Oversampling NOS |
| Oversampling OS | |
| AC Power Requirement | 110-240VAC, 50/60Hz |
| Power Consumption | ≤20W |
| Frequency Response | 20-70KHz -3dB |
| THD+N | 0.0020% |
| S/N Ratio | 120dB |
| Dynamic Range | >121dB |
| Stereo Crosstalk | -110dB |
| Dimension | 320 x 330 x 80 mm |
| Weight | 8.5 Kg |
| Color | Silver / Black |



